Features:
Our Gas Generator Set Power: 500KW combines reliability, high power generation quality, lightweight design, compact size, easy maintenance, and low-frequency noise emission. With these exceptional features, it is the perfect power solution for various industries and applications. Invest in this professional-grade generator set today and experience uninterrupted power supply like never before.
Our advantages
1. good startup performance, high startup success rate
2 .the power generation quality is good, the unit runs very stable, better than the diesel generator set electrical performance indicators.
3. the use of flammable gas is clean, cheap energy, low cost, and can turn waste into treasure, will not produce pollution.
4. low noise and low vibration Because the gas turbine is in a high-speed rotation state, its vibration is very small, and the low-frequency noise is better than the diesel generator set.
Technical Parameters
Gen-set specifications | |
Model | WPG625B(C)7NG |
Prime Rating kVA/kWe | 625/500 |
Continual Rating kVA/kWe | 625/500 |
Voltage V | 400/230 |
Frequency Hz | 50 |
Power Factor | 0.8(lagging) |
No. of Phases | 3 |
Sound@7m(dB·(A)) | Open:≤99 dB(A);Silence:≤85 dB(A) |
Ambient temp(°C) | -10~40(If <-10, oil and water heating; If >40, power correction) |
Altitude(m) | ≤2000 |
Fuel | Pipeline natural gas;MN≥85 |
Gas supply pressure(kPa) | Max. inlet 50 (Special pressure, contact with company) |
Steady-state voltage deviation | ≤±2.5% |
Transient voltage deviation (100%sudden power decrease/increase) | +25%~-20% |
Voltage steady time(s) | 2 |
Steady-state frequency band | ≤1.5% |
Transient frequency deviation from rated frequency (100% sudden power decrease/increase) | ±18% |
Frequency steady time(s) | 15 |
Standard Features | ||
♦ ECU | ♦DC24 Electric starter | ♦WHC9320CAN |
♦ Closed water-cooled | ♦ IP23 | ♦H type insulation |
♦ Air filter | ♦ Muffler | ♦ Circuit Breaker |
♦Starting batteries | ♦ with connective wires | ♦ Radiator |
♦Oil Drain Valve | ♦Forklift Groove | ♦Shock Absorber |
♦ Color | Weichai blue (B)/beige canopy and black chassis (L) | |
♦ Packaging | Packing case(B)/Wrapping sheet(L) |
Engine specifications | |||
Make | WEICHAI | ||
Mode | 12M26D605E300NG | ||
Rated Speed r/min | 1500 | ||
Prime Power kW | 550 | ||
Cooling | Close Liquid cooled | ||
Governor | ECU | ||
Aspiration | Turbocharged, Inter-cooled | ||
No. of cylinders | 12, in-line | ||
Bore (mm) x Stroke (mm) | 150x155 | ||
Displacement (L) | 31.8 | ||
Starting system | 24VDC Electrical | ||
Total coolant capacity engine/tank (L) | 94/104 | ||
Radiator design temperature(°C) | 45 | ||
Lubrication system capacity (L) | 146 | ||
Load rate (%) | 100% | 75% | 50% |
Fuel consumption (kg/h) | 103.11 | 87.56 | 56.56 |
Engine high water heat quantity(kJ/s) | 316.2 | 247.1 | 106.2 |
Engine high water flow(m³/h) | L:30.2 R:30.2 | L:29.6 R:29.5 | L:28.8 R:28.7 |
Engine high water inlet/outlet Tem. (°C) | 84.7/89.6 | 84.1/88.4 | 82.3/84.2 |
Engine high water inlet/outlet Pre. (kPa) | -14.0/142.9 | -14.5/141.5 | -14.9/140.1 |
Exhaust gas heat quantity(kJ/s) | 427.3 | 364.7 | 226.3 |
Exhaust gas flow (kg/h) | 2576 | 2202 | 1401 |
Exhaust Temperature (°C) | L:545 R:543 | L:542 R:540 | L:529 R:528 |
Exhaust back pressure (mbar) | 75 | ||
Exhaust Temperature after recycle(°C) | Heating water120/0.5Mpa steam 190/1MPa steam 220 |
Options | ||
◇Voltage380V/400V | ◇Voltage 415V/440V | ◇Voltage 6.3kV/10.5kV /13.8kV |
◇Single Voltage 220V/230V/240V | ◇Automatic Transfer Switch | ◇Automatic Parallel system |
◇Engine Heater (water) | ◇Engine Heater (oil | ◇Alternator heater |
◇PMG/AREP |
Alternator specifications | |
Make | WEICHAI |
Alternator Frame | WHA-625-4/0.4 |
Exciter Type | Self-excitation |
Enclosure | IP23 |
Voltage regulation | ≤±1% |
Class of Insulation | H |
Winding Pitch | 2/3 |
Rotor | Single bearing |
Typical Genset Dimensions | |||||
Genset Model | Length A(mm) | Width B(mm) | Height C(mm) | Wet Weight (kg) | Note |
WPG625B7NG | 3850 | 1680 | 2100 | 5200 | |
WPG625C7NG | 6058 | 2438 | 2591 | 8500 |
Open genset
Silence genset
Features:
Our Gas Generator Set Power: 500KW combines reliability, high power generation quality, lightweight design, compact size, easy maintenance, and low-frequency noise emission. With these exceptional features, it is the perfect power solution for various industries and applications. Invest in this professional-grade generator set today and experience uninterrupted power supply like never before.
Our advantages
1. good startup performance, high startup success rate
2 .the power generation quality is good, the unit runs very stable, better than the diesel generator set electrical performance indicators.
3. the use of flammable gas is clean, cheap energy, low cost, and can turn waste into treasure, will not produce pollution.
4. low noise and low vibration Because the gas turbine is in a high-speed rotation state, its vibration is very small, and the low-frequency noise is better than the diesel generator set.
Technical Parameters
Gen-set specifications | |
Model | WPG625B(C)7NG |
Prime Rating kVA/kWe | 625/500 |
Continual Rating kVA/kWe | 625/500 |
Voltage V | 400/230 |
Frequency Hz | 50 |
Power Factor | 0.8(lagging) |
No. of Phases | 3 |
Sound@7m(dB·(A)) | Open:≤99 dB(A);Silence:≤85 dB(A) |
Ambient temp(°C) | -10~40(If <-10, oil and water heating; If >40, power correction) |
Altitude(m) | ≤2000 |
Fuel | Pipeline natural gas;MN≥85 |
Gas supply pressure(kPa) | Max. inlet 50 (Special pressure, contact with company) |
Steady-state voltage deviation | ≤±2.5% |
Transient voltage deviation (100%sudden power decrease/increase) | +25%~-20% |
Voltage steady time(s) | 2 |
Steady-state frequency band | ≤1.5% |
Transient frequency deviation from rated frequency (100% sudden power decrease/increase) | ±18% |
Frequency steady time(s) | 15 |
Standard Features | ||
♦ ECU | ♦DC24 Electric starter | ♦WHC9320CAN |
♦ Closed water-cooled | ♦ IP23 | ♦H type insulation |
♦ Air filter | ♦ Muffler | ♦ Circuit Breaker |
♦Starting batteries | ♦ with connective wires | ♦ Radiator |
♦Oil Drain Valve | ♦Forklift Groove | ♦Shock Absorber |
♦ Color | Weichai blue (B)/beige canopy and black chassis (L) | |
♦ Packaging | Packing case(B)/Wrapping sheet(L) |
Engine specifications | |||
Make | WEICHAI | ||
Mode | 12M26D605E300NG | ||
Rated Speed r/min | 1500 | ||
Prime Power kW | 550 | ||
Cooling | Close Liquid cooled | ||
Governor | ECU | ||
Aspiration | Turbocharged, Inter-cooled | ||
No. of cylinders | 12, in-line | ||
Bore (mm) x Stroke (mm) | 150x155 | ||
Displacement (L) | 31.8 | ||
Starting system | 24VDC Electrical | ||
Total coolant capacity engine/tank (L) | 94/104 | ||
Radiator design temperature(°C) | 45 | ||
Lubrication system capacity (L) | 146 | ||
Load rate (%) | 100% | 75% | 50% |
Fuel consumption (kg/h) | 103.11 | 87.56 | 56.56 |
Engine high water heat quantity(kJ/s) | 316.2 | 247.1 | 106.2 |
Engine high water flow(m³/h) | L:30.2 R:30.2 | L:29.6 R:29.5 | L:28.8 R:28.7 |
Engine high water inlet/outlet Tem. (°C) | 84.7/89.6 | 84.1/88.4 | 82.3/84.2 |
Engine high water inlet/outlet Pre. (kPa) | -14.0/142.9 | -14.5/141.5 | -14.9/140.1 |
Exhaust gas heat quantity(kJ/s) | 427.3 | 364.7 | 226.3 |
Exhaust gas flow (kg/h) | 2576 | 2202 | 1401 |
Exhaust Temperature (°C) | L:545 R:543 | L:542 R:540 | L:529 R:528 |
Exhaust back pressure (mbar) | 75 | ||
Exhaust Temperature after recycle(°C) | Heating water120/0.5Mpa steam 190/1MPa steam 220 |
Options | ||
◇Voltage380V/400V | ◇Voltage 415V/440V | ◇Voltage 6.3kV/10.5kV /13.8kV |
◇Single Voltage 220V/230V/240V | ◇Automatic Transfer Switch | ◇Automatic Parallel system |
◇Engine Heater (water) | ◇Engine Heater (oil | ◇Alternator heater |
◇PMG/AREP |
Alternator specifications | |
Make | WEICHAI |
Alternator Frame | WHA-625-4/0.4 |
Exciter Type | Self-excitation |
Enclosure | IP23 |
Voltage regulation | ≤±1% |
Class of Insulation | H |
Winding Pitch | 2/3 |
Rotor | Single bearing |
Typical Genset Dimensions | |||||
Genset Model | Length A(mm) | Width B(mm) | Height C(mm) | Wet Weight (kg) | Note |
WPG625B7NG | 3850 | 1680 | 2100 | 5200 | |
WPG625C7NG | 6058 | 2438 | 2591 | 8500 |
Open genset
Silence genset
content is empty!